Skip to main content
All CollectionsCandidate
How to Scan a QR Code in the Mobile App for Assessment Video/Audio Questions
How to Scan a QR Code in the Mobile App for Assessment Video/Audio Questions

This guide will walk you through how to scan the QR code in the mobile app and complete video or audio questions seamlessly.

Jaya Shrivastava avatar
Written by Jaya Shrivastava
Updated over a week ago

This article provides a step-by-step guide for candidates attempting Testlify assessments, focusing on how to scan the QR code using the mobile app for video questions. It also explains browser-specific behavior and key tips for completing video and audio questions effectively.

If you are using non-Chromium browsers (Firefox, Safari, etc.), only the QR code scanner option will appear. The desktop camera option is not supported for these browsers. However, for Chromium-based browsers (Chrome, Edge, etc.), then the desktop/laptop camera will be displayed.

Mobile App Instructions

Scanning the QR Code

  1. Open the Testlify Mobile App on your phone.

  2. Allow the app to access your camera and microphone (required on first use).

  3. Point your device’s camera at the QR code displayed on your desktop/laptop screen

  4. Once scanned, you’ll be taken to the respective question (video or audio).

For Video Questions

Recording Process

  1. Prepare to Record:

    • By default, the Submit button is disabled until a recording is completed.

    • Use the Switch Camera button to toggle between front and rear cameras.

    • You cannot switch cameras while recording.

  2. Start Recording:

    • Tap the Record button. A 3… 2… 1… countdown will appear, then recording will begin.

    • During recording, the Submit button remains disabled.

  3. Submit Your Answer:

    • After recording, the Submit button will appear. Tap it to finalize your answer.

    • Use the Back button to return to the QR scanner screen if needed.

      For Audio Questions

      Recording Process

      1. Tap the Microphone Button to begin recording.

      2. A waveform animation will appear while recording audio.

      3. You’ll see the waveform animation again when reviewing your recorded audio.

      Submit Your Answer

      • The Submit button becomes active once the recording is completed.

      • Tap Submit to proceed to the next step.

      Tips for a Smooth Experience

      • Ensure your device’s camera and microphone are enabled and permissions are granted.

      • Use a quiet, well-lit space for recordings.

      • Follow all on-screen instructions carefully.

      For any technical issues, reach out to Testlify support for assistance.

This guide will help you confidently scan the QR code and complete your assessment. Best of luck!

Did this answer your question?